Bohler S590 Microclean for Hobs
2022-08-19 11:55:41
jiangxingTools
2556
Bohler S590 Microclean for Hobs
Material composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30, Co-8.40
Standard: 1.3244, HS6-5-3-8, EN ISO 4957
Performance feature of Gear Hobs with S590:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: high
Edge Stability: high
Grindability: high
Hot Hardness (red hardness): high
相關文章
-
Taper Shank Type Shaper Cutters with GB 6081
Taper Shank Type Shaper Cutters with GB 6081These shank type shaper cutters are 20° PA, non-topping... - Module and DP Gear Hobs with 14°30′ – 45°
- PA20° Profile DIN3972 Standard Gear Cutting Hob with Module m6.5
- PA20° Standard Involute Gear Milling Cutter with Module m0.6
- PA20° Standard Gear Milling Cutter with Module m1
- PA20° Pre-shave Gear Hobbing with Module m2.25
- High Precision Module Gear Hobs
