Taper Shank Type Shaper Cutters with GB 6081
2023-04-06 08:19:39
jiangxingTools
2432
Taper Shank Type Shaper Cutters with GB 6081
These shank type shaper cutters are 20° PA, non-topping finishing cutters, for spur gears.
tooth profile can be done with GB 6082, DIN 1829, JIS B 4356, and BS 5246
Nominal pitch dia. 25mm, 38mm, module range: m1-m3.75
Diametral pitch shank type shaper cutter can be made as your request.
morse stub taper number is No. 2 or No.3
相關(guān)文章
-
Disk Type Shaper Cutters with DIN 1825
Disk Type Shaper Cutters with DIN 1825These shaper cutters are 20° PA non-topping finishing cuttersT... - PA20° Module m3.5 Standard Involute Gear Hob
- PA20° Standard Gear Milling Cutter with Module m14
- Description of Gear Hobbing Workpiece
- Comparing composition of raw material for hobs
- Gear hob for timing pulley
- PA20° Pre-shaving Gear Hob with Module m7
