Module, DP and CP for Spur Gear Hobs
2021-11-26 10:16:31
jiangxingTools
3000
Module, DP and CP for Spur Gear Hobs
In most English-speaking countries, diametral pitch and circular pitch are used instead of the module.
lt is best to convert the above values into module and to proceed with the calculated module in the usual way.
The equations for the conversion into module are:
m = 25.4 / DP
m = 25.4 · CP / 3.1416
You are welcome to visit our new website for more details on gear cutting tools and gear hobs.
相關(guān)文章
-
Timing Pulley Hob for HTD 3M
Timing Pulley Hob for HTD 3Mtiming belt profile: HTDbelt type: 3Mcommon range: 9-15T, 16-25T, 26-80T... - Involute Spline Hob with PA45°
- Shank-type gear shaping cutter with DIN 5482
- Hobs for timing belt pulleys to DIN/ISO 5294
- PA20° Inserted Blade Gear Hob with Module m22
- PA20° Module m1 Standard Involute Gear Hob
- Solid Carbide Small Module Cycloidal Gear Hob
